What are the processing processes for acrylic display racks?
Acrylic display stands have become the most ideal and most commonly used display device in the field of display props. The display frame made of acrylic material is favored by the display industry because of its corrosion resistance, impact resistance, light transmission performance and beautiful appearance. It is also recognized as the most ideal material for the display stand. Nowadays, in the shopping malls and supermarkets, acrylic display stands made of acrylic can be seen everywhere, but I don't know how the acrylic display stand is processed. Today I will take you through the process of understanding the processing of the acrylic display stand.
Detailed description of the processing process of acrylic display rack:
1.Unloading: Because the acrylic sheets are all in one piece, when processing the acrylic, the whole piece of acrylic sheet is processed into the sheet of the required size as needed, so it is necessary to open the material. Cutting. High-density table saws are typically used when unpacking acrylic sheets because the table saw can reduce errors and keep them within 0.5 mm. Moreover, when the acrylic display frame is opened, it is necessary to control the accuracy of the material and whether the material to be opened is at right angles.
2.Trimming: The surface of the acrylic display processing material needs to be bright and bright, but the edge of the acrylic material becomes lost by the first step of the material, so it must be trimmed, and the trimming can make the surface not flat enough. Perform trimming, and enlarge 1 mm in advance when trimming for trimming.
3.Laser cutting: laser cutting is aimed at the cutting of the processing material of the opposite-sex acrylic display frame, and it should be controlled by the whole computer, and the thickness of the laser cutting should not exceed 10 mm, and the edge of the cut sheet of 10 mm or more is too Not ideal.
4.Hot bending: The current hot bending of acrylic sheet is mainly to soften the acrylic sheet by heat, and then bend it along a straight line, and then customize it to cool it.
5.Bonding: It is to bond the processing material of the acrylic display frame with good glue, and pay attention to the control during the bonding process, so that it can not produce bubbles, the error of bonding is small, and the appearance is beautiful.
The above is the processing process of acrylic display rack. If you want to know more about the industry knowledge of acrylic display stand, please keep an eye on our website and update it from time to time. We are a professional enterprise engaged in acrylic display setting and acrylic display frame processing. Welcome to contact us to customize your items.